Siemens UL 1066 Operating Instructions Manual page 2

NOTE
These instructions do not purport to cover all details or variations in equipment, or to provide for every possible contingency to be met in 
connection with installation, operation or maintenance. Should further information be desired or should particular problems arise, which are
not covered sufficiently for the purchaser's purposes, the matter should be referred to the local Siemens sales office. The contents of this
instruction manual shall not become part of or modify any prior or existing agreement, commitment or relationship. The sales contract contains
the entire obligation of Siemens. The warranty contained in the contract between the parties is the sole warranty of Siemens. Any statements
contained herein do not create new warranties or modify the existing warranty.

TRADEMARKS
Unless otherwise noted, all names identified by ® are registered trademarks of Siemens AG or Siemens Industry, Inc. The remaining 
trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Symbols
10 Nm 89 lb-in
1
Visual examination
Hook
Slotted-type screwdriver
Cruciform screwdriver
Philips (PH), PoziDriv (PZ)
Torx screwdriver (T)
Hex socket screwdriver
Open end wrench
Tightening torque
Cable tie
Add in writing
First step of action sequence