Terminal assignment
Terminal assignment of digital input module
X4
Inputs 4-6
X5
Inputs 1-3
Settings
Setting principle (page 9-81)
Settings of digital input module
BUS
Inputs 1-6 are active.
INPUT
If there is an input signal present, a corresponding message is transmitted
to the
PARAMETER SWITCH Input 1 is used for parameter switchover. All other inputs have no function.
No input signal (LED 1 not lights up):
Parameter set A activated
Input signal available (LED 1 lights up):
Parameter set B activated
NOTE
The parameter switchover query can be overruled by a query via the BUS communication, the BDA or the graphical display.
Indicators
(page 9-81)
Testing
(page 9-81)
BUS
via the COM15/16 module.
BUS
Input
9 – 85