Remote access via Ethernet
The circuit breaker data, including parameterization, are accessed via customer-side Ethernet. This connection type is only possible in the
BDA PLUS version.
(1)
Browser-capable input/output device (e.g. laptop computer)
(2)
Ethernet cable
(3)
BDA PLUS
c
(4)
External
module
(5)
Connection cable SUB-D, 15-pole (BDA) to RJ45 plug (c connection)
(6)
Ethernet connection
9.4.5
Voltage supply
The BDA requires a voltage supply of 24 V DC. This can be applied via:
- a separate, standard plug-type power supply unit or
- the
CublicleBUS
with the external voltage supply of the circuit breaker electronics.
9.4.6
Catalog numbers
9 – 96
BDA PLUS
Catalog No.
WLBDAP