Polycom Digital Signage 2000 Getting Started Manual page 18

Polycom Digital Signage Getting Started Guide
14
Connect the monitor. Please note that the monitor must be connected to
3
the connector marked "1" on the DVI or VGA output splitter cables. The
cables are pictured below.
Note: While the PDS Player shipment includes the DVI and VGA splitter cables,
users will need to supply their own VGA or DVI cable to attach to the splitter.
Connect the power cord to the AC power socket on the device.
4
Press the Power button on the front panel of the Player.
5
Note: Do not attach the Player to the network before powering on.
The Player application may start automatically. Press A
6
simultaneously to suspend the Player CG Renderer. This may need to be
repeated upon each reboot of the Player application.
Right-click on the Agent Icon, a red cross on a red field, in the Windows
7
System Tray.
Select Disable Agent Actions from the menu that appears.
Open the Windows Start Menu. Right-click on Computer and then left
8
click Properties.
Hardware Setup
+ E
LT SC
Polycom, Inc.