natus Otometrics Bio-logic AuDX PRO Quick Start Manual page 7

Quick Guide:
Bio-logic AuDX PRO Quick start
® ®
A calibration will be performed prior to measurement. A green light indicates successful calibration. After
successful ear probe calibration, the test will start automatically. Please note that the presets for DPOAE
diagnostics are HiRes, which allows testing frequencies in 10 Hz increments or up to 30 points per octave.
7
Probe fit override for patients
with PE tubes or middle ear
perforations
Progress for each
test frequency
Stop test
Resume test
Otometrics - Next generation Bio-logic products
Bio-logic
Overall test
progress
Noise
floor level
Switch to
cartoon mode
Skip a
frequency
®