Do you have a question about the Imbera VR08 and is the answer not in the manual?
Questions and answers
Pedro Barrera
January 17, 2025
Una disculpa,tengo un refrigerador imbera vr08 **** condensador de parrilla trasera.
Ni pregunta ;lleva condensador en la parte donde va el compresor.
Gracias por la información
Table of Contents Model VR08 / Model VR06 / Model VR12 / Model VR10 / Model G319 HC Model G319 / Model G326 / Model VRD37 / Model VRD43 / Model G372 Model VR1.5 / Model VR04 / Model G372 BLACK / Model VFS24 Section Page Disclaimer...
Disclaimer OMCAN IS NOT RESPONSIBLE FOR ANY DAMAGES DUE TO WATER LEAKS. WARRANTY FOR WATER LEAKS IS VOID IF THE AMBIENT ROOM TEMPERATURE EXCEEDS 75°F AND 55% RELATIVE HUMIDITY, AND THE APPLIANCE DRAIN IS NOT CONNECTED DIRECTLY TO A FLOOR DRAIN.
If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents.
Si el paquete ha sufrido un manejo de poco cuidado, golpes o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro de las 24 horas, de modo que podamos iniciar una reclamación con la compañia.
Page 6
This cooler contains a charge of refrigerant at a pressure determined by the type of refrigerant used and the internal volume. The installation and welding of the piping should be treated by a service technician authorized by Omcan who is properly trained in the use and management of refrigerants. •...
Page 7
IMPORTANT • Omcan reserves the right to perform product improvements. Design and specifications are subject to change without notice. OMCAN IS NOT RESPONSIBLE FOR ANY DAMAGES DUE TO WATER LEAKS. WARRANTY FOR WATER LEAKS IS VOID IF THE AMBIENT ROOM TEMPERATURE EXCEEDS 75°F AND 55% RELATIVE HUMIDITY, AND THE APPLIANCE DRAIN IS NOT CONNECTED DIRECTLY TO A FLOOR DRAIN.
Technical Specifications VR SERIES Model VR08 VR06 VR12 VR10 VR1.5 VR04 Type Refrigerator 220 L 144.4 L 328.2 L 253.4 L 42.4 L 113.3 L Volume 7.7 cu. ft. 5.1 cu. ft. 11.5 cu. ft. 8.9 cu. ft. 1.5 cu. ft. 4 cu.
Page 9
Technical Specifications G3 SERIES Model G319 HC G319 G326 G372 G372 BLACK Type Refrigerator Volume 543.6 L / 19.2 cu. ft. 756 L / 26.7 cu. ft. 2004.8 L / 70.8 cu. ft. Number of Doors Number of Shelves 24.8” x 19.6” 15.9”...
Page 10
Technical Specifications VRD SERIES Model VRD37 VRD43 Type Refrigerator Volume 1059.6 L / 37.4 cu. ft. 1179.7 L / 41.6 cu. ft. Number of Doors Number of Shelves Shelf Size 20.5” x 20.6” / 520 x 524mm 24.2” x 19.7” / 615 x 501mm 20 oz.
Technical Specifications VFS SERIES Model VFS24 Type Freezer Volume 670.3 L / 23.7 cu. ft. Number of Doors Number of Shelves Shelf Size 25.7” x 21.3” / 653 x 541mm Temperature -28 to -23°C / -18.4 to -9.4°F Range Max Ambient 32°C - 90°F Temp Rating Energy...
Page 12
Installation • Never place objects over the cooler. Consider that the cabinet’s structure has been constructed mainly of laminated sheet metal and polyethylene foam that may easily bend or deform when hit, and it may even deform over time due to placement of TV, microwave oven and other objects.
Page 14
Installation SHELVES These accessories must be used to place products inside the cooler. They are designed to optimize cooler’s internal space. Depending on your cooler’s model, it may have different types of shelves. These are some types: FLOOR SHELVES Observe that these shelves have supports to place them over cooler’s floor, as well as enough rods to support product load.
Page 15
Installation Make sure the shelf and the product allow the door to close completely. IMPORTANT: shelves must have an adequate orientation and position, never to be forced or exert pressure on cooler walls or any other accessory. VISISLIDE (OPTIONAL) The Visislide system allows placing shelves and product in an angle; thus, bottles will always slide to the front.
Installation Omcan coolers with HC refrigerants (R290 / R600) are designed to operate under a specific electric voltage. Check cooler’s serial label to make sure that the electrical classification is adequate for installation. IMPORTANT: ground connection is a protection system for equipment connected to electrical network.
Page 17
Operation STORING PRODUCT INSIDE COOLER • If a floor shelf is included (Type A, B, C, D), place it directly inside cooler, and right after that, place shelves (Type E, F, G), using metallic clips (make sure they are aligned at the same height). If a floor shelf is not included use clips to place a shelf.
Page 18
Operation If your cooler has a Intelligent Control Function (CIF), follow the instructions attached to cooler for further detail. Each CIF has its own cooling configuration. It may also include energy savings modes and it may transmit information to your suppliers. Energy savings modes may be activated with the display button or automatically when the cooler is not in use.
Page 20
Door hinges and supports have been designed for an adequate turning radius and a proper seal separation distance. If for any reason you need to replace or adjust, request support from the Omcan Tech Support Department at 1-800-465-0234.
Page 21
If you notice that it lacks sufficient force to fully close or it closes with too much force such that damage the to door or refrigerated product may be at risk, call the Omcan Tech Support Department at 1-800-465-0234.
Operation SELF-CLOSING SYSTEM FOR SLIDING DOORS The cooler may be equipped with an integrated self-closing sliding door system inside the frame, which prevents doors from remaining open carelessly, forcing them to close by an internal spring part of its mechanism. If you notice that it lacks sufficient force to fully close or it closes with too much force, such that it could damage the door or refrigerated product may be at risk, call the Customer Service Center.
Maintenance be cleaned off with water and degreasing agents. • Do not use sharp pointed objects to remove excessive grime, use brush if required. IMPORTANT: do not use solvent or abrasive products for cleaning as they may damage surface finishing. EVAPORATOR DEICING •...
Page 24
Troubleshooting Cooler vibrates and/or It is not correctly leveled Cooler stability. Make sure you place makes noises. on a firm and flat surface. cooler on a firm and flat surface. No objects are kept under Remove any carpeting, cooler that might cause carton, or other objects instability.
Page 25
Troubleshooting Compressor does not Voltage variation If business lamps vary Allow for voltage restore start, makes buzzing is excessive or their intensity. and voltage increase. noises or stops due to undervoltage is observed. thermal protector. Vent motor is protected Fan rotation without Call Customer Service or burnt.
Parts Breakdown Model VR08 General Assembly 41215...
Page 27
Parts Breakdown Model VR08 Evaporator Assembly 41215...
Page 28
Parts Breakdown Model VR08 Condenser Assembly 41215...
Page 29
Parts Breakdown Model VR08 Door Assembly 41215...
Page 30
Parts Breakdown Model VR08 General Assembly 41215 Item No. Description Position Item No. Description Position Item No. Description Position Controller, ELE BEV 115V N/SEN for 66438 66440 Grill, Wire Rear VL08 for 41215 66442 Front Grill, THER BK for 41215 41215 66439 Pilaster, 1046 7B Diam 6.7 for 41215...
Page 31
Parts Breakdown Model VR06 General Assembly 41214...
Page 32
Parts Breakdown Model VR06 Evaporator Assembly 41214...
Page 33
Parts Breakdown Model VR06 Condenser Assembly 41214...
Page 34
Parts Breakdown Model VR06 Door Assembly 41214...
Page 35
Parts Breakdown Model VR06 General Assembly 41214 Item No. Description Position Item No. Description Position Item No. Description Position Leveling Screw, 1/2”-13x2” W/PLA UL 66393 66397 Grill, MET Containment R2 for 41214 66399 Clip, F/Pilaster 16G Polished for 41214 for 41214 66394 Pilaster, 428 4B Diam 6.7 for 41214 66398...
Page 36
Parts Breakdown Model VR12 General Assembly 41217...
Page 37
Parts Breakdown Model VR12 Evaporator Assembly 41217...
Page 38
Parts Breakdown Model VR12 Condenser Assembly 41217...
Page 39
Parts Breakdown Model VR12 Door Assembly 41217...
Page 40
Parts Breakdown Model VR12 General Assembly 41217 Item No. Description Position Item No. Description Position Item No. Description Position AD562 Pilaster for 41217 AD571 Driver 24W for 41217 AD578 Magnetic Support Switch for 41217 AD563 Anti-Vacuum Moulding for 41217 AD572 Power Cord for 41217 AD579 Control Knob for 41217...
Page 41
Parts Breakdown Model VR10 General Assembly 41216...
Page 42
Parts Breakdown Model VR10 Evaporator Assembly 41216...
Page 43
Parts Breakdown Model VR10 Condenser Assembly 41216...
Page 44
Parts Breakdown Model VR10 Door Assembly 41216...
Page 45
Parts Breakdown Model VR10 General Assembly 41216 Item No. Description Position Item No. Description Position Item No. Description Position 66460 Grill, Wire Rear VR10x12 UL for 41216 66443 Leveling Screw, 1/2”-13x1 1/2” for 41216 66400 Thermometer, Wall MTG for 41216 Kit Visislide Low 6 FTES CCE V12 for Controller, ELE BEV 115V N/SEN for 66461...
Page 46
Parts Breakdown Model G319 HC General Assembly 45445 Model G319 41161...
Page 47
Parts Breakdown Model G319 HC Evaporator Assembly 45445 Model G319 41161...
Page 48
Parts Breakdown Model G319 HC Condenser Assembly 45445 Model G319 41161...
Page 49
Parts Breakdown Model G319 HC Door Assembly 45445 Model G319 41161...
Page 50
Parts Breakdown Model G319 HC General Assembly 45445 Item No. Description Position Item No. Description Position Item No. Description Position Controller ELE BEV 115V N/SEN 6T 62480 Back Grill for 45445 66443 Leveling Screw, 1/2”-13x1 1/2” for 45445 66506 for 45445 AD560 Shelf G313x16x19 UL Black for 45445 66504...
Page 51
Parts Breakdown Model G319 General Assembly 41161 Item No. Description Position Item No. Description Position Item No. Description Position Controller ELE BEV 115V N/SEN 6T 62480 Back Grill for 41161 66443 Leveling Screw, 1/2”-13x1 1/2” for 41161 66506 for 41161 66503 Shelf G313x16x19 UL for 41161 66504...
Page 52
Parts Breakdown Model G326 General Assembly 41219...
Page 53
Parts Breakdown Model G326 Evaporator Assembly 41219...
Page 54
Parts Breakdown Model G326 Condenser Assembly 41219...
Page 55
Parts Breakdown Model G326 Door Assembly 41219...
Page 56
Parts Breakdown Model G326 General Assembly 41219 Item No. Description Position Item No. Description Position Item No. Description Position Front Grill, Ther BK VL300 L/R Hinge 66529 Pilaster, 1268 6B Diam 6.35 for 41219 66532 Shelf, G322x26 for 41219 66534 for 41219 Controller.
Page 57
Parts Breakdown Model VRD37 General Assembly 42862...
Page 58
Parts Breakdown Model VRD37 Evaporator Assembly 42862...
Page 59
Parts Breakdown Model VRD37 Condenser Assembly 42862...
Page 60
Parts Breakdown Model VRD37 Door Assembly 42862...
Page 61
Parts Breakdown Model VRD37 General Assembly 42862 Item No. Description Position Item No. Description Position Item No. Description Position 66543 Back Grill for 42862 45470 Black Shelf for 42862 66545 Clip Pilaster Shelf for 42862 66443 Leveling Screw, 1/2”-13x1 1/2” for 42862 66544 Kit Visislide Low for 42862 45961...
Page 62
Parts Breakdown Model VRD43 General Assembly 41218...
Page 63
Parts Breakdown Model VRD43 Evaporator Assembly 41218...
Page 64
Parts Breakdown Model VRD43 Condenser Assembly 41218...
Page 65
Parts Breakdown Model VRD43 Door Assembly 41218...
Page 66
Parts Breakdown Model VRD43 General Assembly 41218 Item No. Description Position Item No. Description Position Item No. Description Position Kit Visislide Low 7 FTES 2TPUL V12 66565 Front Grill, Ther BK for 41218 66399 Clip, F/Pilaster 16G Polished for 41218 66568 for 41218 Controller.
Page 67
Parts Breakdown Model G372 General Assembly 41220 Model G372 BLACK 45250...
Page 68
Parts Breakdown Model G372 Evaporator Assembly 41220 Model G372 BLACK 45250...
Page 69
Parts Breakdown Model G372 Condenser Assembly 41220 Model G372 BLACK 45250...
Page 70
Parts Breakdown Model G372 Door Assembly 41220 Model G372 BLACK 45250...
Page 71
Parts Breakdown Model G372 General Assembly 41220 Model G372 BLACK 45250 Item No. Description Position Item No. Description Position Item No. Description Position 66545 Clip Pilaster Shelf for 41220 & 45250 66580 Louvered for 41220 & 45250 66581 Back Grill G3T72 for 41220 & 45250 66579 Louvered Left Cut for 41220 &...
Page 72
Parts Breakdown Model VR1.5 General Assembly 45800...
Page 73
Parts Breakdown Model VR1.5 Condenser Assembly 45800...
Page 74
Parts Breakdown Model VR1.5 Door Assembly 45800...
Page 75
Parts Breakdown Model VR1.5 General Assembly 45800 Item No. Description Position Item No. Description Position Item No. Description Position Controller, ELE BEV 115V N/SEN for Leveling Screw, 1/2”-13x2” W/PLA UL Thermometer, Wall MTG, 3017492 for 66530 66393 66400 45800 for 45800 45800 AD623 Grill, Met Unit UL BR for 45800...
Page 76
Parts Breakdown Model VR04 General Assembly 45801...
Page 77
Parts Breakdown Model VR04 Condenser Assembly 45801...
Page 78
Parts Breakdown Model VR04 Door Assembly 45801...
Page 79
Parts Breakdown Model VR04 General Assembly 45801 Item No. Description Position Item No. Description Position Item No. Description Position AD634 Temperature Control for 45801 AD636 Grommet for 45801 AD641 Leveling Leg for 45801 AD635 Control Box for 45801 AD637 Back Grill for 45801 AD642 Front Grill for 45801 AD579...
Page 80
Parts Breakdown Model VFS24 General Assembly 41221...
Page 81
Parts Breakdown Model VFS24 Evaporator Assembly 41221...
Page 82
Parts Breakdown Model VFS24 Condenser Assembly 41221...
Page 83
Parts Breakdown Model VFS24 Door Assembly 41221...
Page 84
Parts Breakdown Model VFS24 General Assembly 41221 Item No. Description Position Item No. Description Position Item No. Description Position Thermometer, Wall MTG, 3017492 for 62480 Back Grill G3D42 for 41221 66645 Clip, F/Pilaster for 41221 66507 41221 66643 Shelf for 41221 66646 Pilaster for 41221 66647...
Warranty Registration Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: Merci d’avoir acheté...
Page 100
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Need help?
Do you have a question about the Imbera VR08 and is the answer not in the manual?
Questions and answers
Una disculpa,tengo un refrigerador imbera vr08 **** condensador de parrilla trasera. Ni pregunta ;lleva condensador en la parte donde va el compresor. Gracias por la información