Pro-Ject Audio Systems Debut RecordMaster II Instructions For Use Manual page 9

Never return a record player without making sure that is it safely disassembled and correctly packaged in the
original packaging according to the diagrams on the last page of this user guide. Please remove these parts
and pack them separately: lid, counterweight, anti-skating weight, platter and belt. Fit the cartridge
protection cap. Insert the transport lock for the tonearm prior to carefully packaging the record player.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use and/or by transportation without the original packaging. Modification or change to any part
of the product by unauthorized persons release the manufacturer from any liability over and above
the lawful rights of the customer.
PRO-JECT is a Registered Trademark of H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems
©
Copyright 2020. All rights reserved.
© Pro-Ject Audio Systems · Pro-Ject Debut RecordMaster II · Revision 2020.10.12
The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.
9