Route; Default Route; Static Route - D-Link DWR-M961 User Manual

URL Address

5.3.5 Route

This menu shows you the current default route and static route. Static Route reduces route selection problems
and corresponding data overload and accelerates data packet forwarding.

5.3.5.1. Default Route

You can select which wan connection as default gateway route.if not ,system will auto select a connect up wan
as default gateway route.

5.3.5.2. Static Route

Object
Enable Static Route
IP Address
Subnet Mask
Gateway
Block or allow access URL.
Figure 5-3-9 Default Route
Figure 5-3-10 Static Route
Description
Enable or disable Static route.
Enter the destination network
Enter the network mask
Enter the network gateway
-66-
User Manual of DWR-M961