D-Link DWR-M961 User Manual page 21

2. Then the Wireless Router built-in DHCP server will assign IP address to the PC automatically.
If you are sure the DHCP server of Wireless Router is enabled, you can set up the TCP/IP Protocol in "Obtain
an IP address automatically" mode on your PC. And then the Wireless Router built-in DHCP server will assign
an IP address to the PC automatically.
On the Windows taskbar, click the Start button, point to Control Panel, and then click it.
1)
2) Under the Network and Internet icon, click on t he View network status and tasks. And then click
Change adapter settings.
1. Installing TCP/IP Component
Figure 4-1 Change Adapter Settings
-21-
User Manual of DWR-M961