Ricoh FT6645 Manual page 86

23 April 1993 IMAGE TRANSFER
After the image transfer is
completed, the charge on the
transfer belt holds the paper to
the transfer belt.
Before separating the paper from
the transfer belt, the transfer belt
is discharged by the discharge
plate [A].
[A]
[B]
The transfer power pack [B] inside
[A]
the transfer belt unit monitors
the current fed back from the
discharge plate to adjust the
transfer current. This way,
the current stays constant even if
the paper, environmental
conditions, and the transfer belt
surface resistance are changed.
[B]
2-61