Ricoh FT6645 Manual page 203

23 April 1993
1 Auto reset/Auto off
Auto reset
Screen Saver
Auto off
SADF Auto reset
(for machines with dual job
feeder only)
(system A or B)
2 Select special tray
Tray for Cover Sheet
Tray Display for
Cover Sheet
Tray for Slip Sheet
Tray Display for
Slip Sheet
•
The trays set for cover sheets or slip sheets cannot be used for the Auto
Paper Select, Auto Tray Switching, and Duplex copying modes.
The copier returns to its initial condition automatically after
your job is finished. The automatic reset time can be set
from 1 second to 999 seconds, or the function can be
turned off.
Default: 60 sec.
When the machine does not detect anyone operating it for
the selected time, the touch panel display turns off
automatically. This time can be set from 1 second to 999
seconds, or the function can be turned off.
Default: 60 sec.
When the copier is used after the weekly timer has turned
it off, the copier will turn itself back off after the selected
time. The auto off time can be set from 1 minute to 999
minutes, or the function can be turned off.
Default: OFF
In the SADF mode (Semi-Automatic Document Feed, see
page 23), if the next original is not set within the selected
time, the machine will cancel the SADF mode
automatically. The SADF Auto reset time can be set from
1 second to 60 seconds, or the function can be turned off.
Default: 5 sec.
Select the tray for the Cover function. Paper for cover
sheets will be fed from the selected tray.
Default: No select
You can see which tray is set for cover sheets. If you want
to see the tray display only in the Cover mode, select
"Mode selected". If you want to always see the tray
display, select "Full time".
Default: Full time
Select the tray for the Slip Sheet functions (Paper
Designate and OHP Slip Sheet). Paper for slip sheets will
be fed from the selected tray.
Default: No select
You can see which tray is set for the slip sheets. If you
want to see the tray display only in the Slip Sheet mode,
select "Mode selected". If you want to always see the tray
display, select "Full time".
Default: Full time
4-49
SERVICE PROGRAM MODE