Ricoh FT6645 Manual page 316

23 April 1993
6.16 TANDEM FEED TRAY PAPER SIZE CHANGE
NOTE: 1. At the factory, all paper trays (1st, 2nd and 3rd) are set as A4
sideways. At the customer's request, change the paper size as
follows.
2. For the 550 sheet fixed paper tray and the 1500 sheet built-in
LCT, refer to the installation procedure section.
[B]
[A]
- Used as tandem tray for A4 sideways or smaller size paper -
1. Draw out the tandem tray [A].
2. Remove the rear and front side fences [B] (one screw and one pushlock
each) on the right tandem tray.
3. Re-position the end fences [C] on both rear and front side fences (1
screw each) according to the paper size.
[C]
5-91
PAPER FEED
[B]
[B]