Ricoh FT6645 Manual page 341

DUPLEX UNIT
- Jogger Drive Wire Installation -
1) Set the bead [A] which is closer to the red colored hook [B] in the hole
[C] and install the stopper [D] (1 screw).
2) Round the drive wire twice around the drive motor pulley [E] as shown.
3) Move the rear jogger fence bracket [F] to the rear end position (until
the bracket [F] touches the screw [G]) and keep this condition.
4) Under the above condition, place the front jogger fence bracket [H] to
the front end position (until the bracket [H] touches the front screw).
5) Install the stopper [I] to fix the front jogger fence bracket with the wire.
[G]
[F]
5-116
23 April 1993
[A]
[D]
[C]
[I]
[H]
[E]
[B]