23 April 1993
1.6 UPPER SIDE
1.6.1 Upper Cover
1. Turn off the main switch.
2. Remove six screws [A].
3. Remove two screws [B] securing the grounding wires.
4. Disconnect two connectors [C].
5. Remove the upper cover [D].
1.6.2 Rear Upper Cover
1. Turn off the main switch.
2. Remove the platen cover or document feeder (DJF or RDH) from the
copier.
3. Remove the upper cover.
4. Remove the 2 screws securing the rear upper cover [E].
5. Disengage the hooks [F] by sliding the rear upper cover to the front and
remove it.
[A]
[A]
5-9
EXTERIOR AND INNER COVER REMOVAL
[D]
[C]
[A]
[B]
[E]
[F]
[E]