Honda HondaJet HA-420 Pilots Operating Manual page 99

Honda Aircraft Company
HA-420 SYSTEMS
POM DESCRIPTION
Indications
Engine parameters are displayed full-time on the EIS in green color.
Analog indications are provided for N and ITT. Digital indications are
1
available for N , ITT, N , Oil Pressure, Oil Temperature and Fuel Flow.
1 2
Caution and warning ranges are displayed when appropriate on the
analog displays. If a limit is exceeded for any displayed parameter the
pointer and digital value changes color to amber or red as appropriate.
Figure 1-48. GE Engine Indication and Status (EIS) Display
On the ground or when a rated thrust is commanded, a cyan thrust mode
icon is displayed above the N gauge together with the associated target
1
N value and caret. On the ground, the rating is shown as a small TO at
1
thrust settings below MCT. Whenever TO thrust is commanded, the TO
icon is displayed in a larger font. MCT is displayed when Maximum
Continuous Thrust is commanded and START is displayed when the
engine is in the start mode.
A white SYNC icon is displayed between the thrust rating icons when
the synchronization mode is active.
HJ1-29000-005-001
October 30, 2016 1-83
FOR TRAINING PURPOSES ONLY