General; Responsibilities - Honda HondaJet HA-420 Pilots Operating Manual

Honda Aircraft Company
HA-420 OPERATING PROCEDURES
POM AND TECHNIQUES
OPERATING PROCEDURES AND TECHNIQUES

GENERAL

The purpose of this section is to provide crew with common techniques
to reference for operation of the HondaJet HA-420. Use of these
procedures enhances crew performance and effectiveness. The
techniques in this manual are not mandatory, nor are they intended to
supersede airmanship and good judgment or guidance of a regulatory
nature. This section shall be used in conjunction with the FAA approved
® ®
Airplane Flight Manual (AFM) and the Garmin G3000 Integrated
Avionics System Pilot's Guide, which provides detailed guidance on
avionics functions, customization, and settings. If there is a conflict, the
AFM shall take precedence.
This manual contains techniques for using standard and optional
equipment. The reader may omit steps referring to any optional
equipment that is not installed.

RESPONSIBILITIES

The techniques in this manual refer to single pilot operations and, where
applicable, provide suggestions for effective crew resource management
when additional crew members are available.
In cases with more than one crew member, certain conventions appear
throughout the manual to designate the crew members and their
responsibilities. The Pilot in Command (PIC) is the ultimate authority
and responsible for safe conduct of the flight. When required, the Second
in Command (SIC) assists the PIC with assigned duties as directed by
regulatory guidance and suggested by this manual. The pilot flying (PF)
HJ1-29000-005-001
October 30, 2016 3-5
FOR TRAINING PURPOSES ONLY