Optional Accessories - Audiovox VOH641A Operation Manual

External Auxiliary A/V Stereo inputs (Aux )
These inputs are provided to facilitate the temporary
connection of optional audio / video equipment, such
as a camcorder or video game system. They can be
accessed by removing their protective plastic cover
located behind the LCD hinge. To play a source with
these inputs, use RCA patch cord to connect the audio
/ video signals to their respective jacks. Mono audio
sources will require the use of an RCA Y cable (PN
0892165) to connect to both right and left inputs. Once
the connections have been made, turn the VOH641A
on and press the source selector button on the pod
until the "AUX" indicator LED illuminates. The unit
will now play the audio and video signals from the
accessory connected.
External
Auxiliary A/V
Stereo
inputs
-7-

Optional Accessories

Wired Headphones
There are two 1/8" headphone jacks on the VOH641A
that can be used with any standard stereo
headphones. These jacks are controlled by the
volume up / down buttons on the VOH641A or the
remote control. Remove and save the protective
plastic cover to access the jacks. Remember to
replace the cover when the jacks are not in use
Wireless Headphones
The VOH641A includes a built in infrared transmitter
for use with Audiovox wireless headphones (PN
MVSWHS). Turning the headphone switch on, and
wearing them activates the internal micro switch
which will activate the internal IR receiver and the
volume can then be adjusted separately with the
controls on each headset. Any number of wireless
headphones can be used, but all must be within a line
of sight from the transmitter, as infrared
transmissions, like visible light travel only in a straight
line. See the documentation accompanying your
Audiovox wireless headphones.
Infrared
Transmitter