Optional Accessories; Wireless Headphones - Audiovox VOH802 Operation Manual

OPTIONAL ACCESSORIES

Wireless Headphones

The VOH802 includes a RF transmitter (P/N
WTXRF01) for use with optional Audiovox wireless
headphones. Tuning the headphone switch on, and
wearing them activates the internal micro switch,
(which includes a tuning knob to tune into the preset
frequency on the RF transmitter), which will activate
the internal RF receiver and the volume can be
adjusted separately with the controls on the headset.
See the documentation accompanying your Audiovox
wireless headphones.
Auxiliary A/V Stereo Inputs Jack
The VOH802 may be equipped with an auxiliary A/V
stereo input connector (optional).
These inputs are provided to facilitate the temporary
connection of optional audio/video equipment, such as
a camcorder or video game system. To play a source
with these inputs, an RCA patch cord is required to
connect the audio/video signals to their respective
jacks. Mono audio sources will require the use of an
RCA Y-cable (P/N 0892165) to connect to both right
and left inputs, if patch cords are installed into the
AUX inputs, the AUX INPUT 2 will be temporarily
bypassed. Once the connections have been made,
turn the VOH802 on and press the source button on
the VOH802 or the TV/Video button on the remote
control until "Video 2" is displayed on the screen. The
unit will now play the audio and video signals from the
accessory connected. The remote control will not
operate the accessory components.
HEADPHONES AUDIO R
-11-
VOH802 Jack Panel
AUDIO L VIDEO
HEADPHONES