Control Operation; Instruction To Controller Operation Keys; Mode Keys; Ok Keys - Viessmann Vitopure S2-2T Manual Book

Control operation

Instructio n to co ntro ller
o peratio n keys
MODE OK

MODE keys

■ Press and hold the key for 3 seconds to unlock and enter
into the standby state.
■ After unlocking, press and hold the key for 3 seconds to
enter into the user menu.
■ Press the key to select items such as clock, year, month,
day, regeneration time cycle, regeneration flow cycle,
regeneration start time and restore default settings.
■ Highlight the selected value.
■ Edit parameter by pressing the Up key ▲ or Down key ▼,
then press the OK key to confirm the storage and return
to standby state.
■ If edition is not required, press the key to enter into the
next item until it returns to the standby state.
OK key
Confirm and save the selected item value.
■ After unlocking, press the key once to schedule a manually
delayed regeneration program and press it again to close
the manually delayed regeneration program.
■ Press and hold the key for 5 seconds to immediately
execute the automatic regeneration program once.
■ Press the key in the user menu interface to exit.
■ In other advanced setting menus, press the key to save
the current option setting and enter into the next parameter
setting.
■ In the main interface play information page: for the
cumulative regeneration times, cumulative processed
water volume, peak flow and other information, press
and hold the key to reset the parameters.
U p k e y , D o w n k e y
In the standby interface, press these two keys to view
the information about system usage.
■ In a certain menu option, press these two keys to adjust
the value or option.
■ Press these two keys at the same time to enter into the
advanced menu.
Enter into the standby interface if there is no operation
within 1 minute.
Lock the system if there is no operation in the standby
interface within 1 minute.

User settings S2-Series

After unlocking, press and hold the key for 3 seconds to enter
into the user menu. Press the key to select items such as clock,
year, month, day, regeneration time cycle, regeneration flow
cycle, regeneration start time and restore default settings.
Highlight the selected value. Edit parameter by pressing the
Up key ▲ or Down key ▼, then press the OK key to confirm
the storage and return to standby state. If edition is not required,
press the key to enter into the next item until it returns to the
standby state.
Current date and time
Sep./27/2020
17:18
Y E A R
2 0 2 0
MONTH
Sep.
DAY
27
For Vitopure S2-2T water purifier,
REGEN.DAYS
set 5 days.
7
For Vitopure S2-3T water purifier,
set 7 days.
For Vitopure S2-2T water purifier,
M E T E R S
set 1500L.
2 0 0 0 L For Vitopure S2-3T water purifier,
set 2000L.
It is recommended to set the time
REGEN.TIME
period when water is not used.
02:00
The system defaults to 02:00.
The default is "Cancel"; if "Confirm"
LOAD DEFAULT
is selected, the system will reset all
NO
parameters related to the regeneration
cycle.
Note: The parameters before reset can
not be restored, so please make careful
PROGRAMMING
selection.
COMPLETE
20