Advance Settings; General Settings S2-Series; Clear Water Consumption Records - Viessmann Vitopure S2-2T Manual Book

Control operation
Advanced settings
Note
Control valve working mode, time of each regeneration step and
others can be set here.This setting should be adjusted by the
engineer for different usage conditions.
Press and hold the Up key ▲ and Down key ▼ for 5 seconds to
enter into the editing state.
Edit the parameter by pressing the Up key ▲ or Down key ▼.
Press the OK key to confirm the storage and enter into the next entry.
Select B .W .F I LT E R
VA LV E M O D E
B .W .F I LT E R
For Vitopure S2-2T water purifier,
BACKWASH
set 5 minutes.
For Vitopure S2-3T water purifier,
7 MINUTES
set 7 minutes.
For Vitopure S2-2T water purifier,
RINSE
set 5 minutes.
7 MINUTES For Vitopure S2-3T water purifier,
set 7 minutes.
Use this function to lock some parameters
LOCK VALUE
in the menu at this level to prevent
UNLOCK
misoperation during normal use.
PROGRAMMING
COMPLETE

General settings S2-Series

System language, unit of measurement and smart cleaning can
be set here.This setting should be adjusted by the engineer for
different usage conditions.Press and hold the MODE key and
the OK key for 5 seconds to enter into the editing state.Edit the
parameter by pressing the Up key ▲ or Down key ▼.Press
the OK key to confirm the storage and enter into the next entry.
Please chose language
LANGUAGE
ENGLISH
Please choose metric
UNITS
METRIC
SMART CLEAN
OFF
PROGRAMMING
COMPLETE
Please select "On", set the number of monitoring days and
smart cleaning period. The number of monitor days is every 7 days
and each backwashing lasts 10 minutes by default. If water
consumption is not monitored for 7 consecutive days, a 10-minute
backwashing process will be performed at 02:00 by default at the
next regeneration time to maintain the gap between filter media
and avoid the filter media from agglomeration due to no
use in a long time.
Clear water consumption
records
■ This setting can clear the system water consumption records.
■ The product may have a value for detection when it leaves
the factory.
■ Please remove it before first use.
■ In the standby interface, press the down key ▼ until the
cumulative water consumption interface appears.
■ Press the OK button to confirm for 5 seconds to clear the
system water consumption record.
TOTAL TREATED TOTAL TREATED
80L
Press the MODE button to return to the standby interface.
21
0L