Safety Tips; Target Groups; Rules And Regulations To Be Observed During Installation; Precautions For Installation, Maintenance And Use - Viessmann Vitopure S2-2T Manual Book

SAFETY TIPS

Please strictly follow these safety tips to reduce the risk of electric shock, injury, fire, death and property
damage.
Danger
t indicates a potential hazard that is highly
likely to cause serious injury or death.
This symbol is used to remind
user of the prohibited
operation steps.
NOTE

Target groups

This manual is intended for use only by the designated
installer or its designated professionals.
Rules and regulations to be observed
during installation
National regulations on installation
Regulations on accident safety protection
Regulations on environmental protection
NOTE
Do not touch the power plug with wet hand; otherwise, it
may cause electric shock. Do not use the power beyond
equipment. Only use 220V AC power. The use of universal
Do not damage power cord and power adapter. The use of
a damaged cord and power adapter may cause electric
when the device is used.
When power adapter plug is removed, hold the plug by
hand and do not pull power cord. If power cord is pulled
out directly, it may cause a short circuit or damage the
Do not cut, modify, excessively distort, twist and pull
power cord or place heavy objects on power cord and
socket.
Before the device is started, fully plug power adapter plug
into power socket. If the plug is not fully inserted into the
socket, it may cause electric shock or overheating, or even
Do not use damaged power adapter plug or loose power
socket.
Please clean the power adapter plug on a regularly basis. If
dust is accumulated on the plug, its moisture may damage
If the device is not used for a long time, remove power
adapter.
Warning
It indicates a potential hazard that could result
in serious injury or death.
This symbol is used to remind
user of the operation steps
that must be followed in order
to operate this product in a
safe manner.
NOTE
Precautions for installation, mainte-
nance and use
The device is suitable for municipal tap water and ground well.
Do not connect unsafe or unknown water source to the
not available for direct drinking.
The working water temperature is 1-39ºC. The device can not be
installed on hot water pipeline.
The device is installed at the rear end of the main water meter. If
other wading device is installed in the rear pipeline of the water
meter, please ensure to install the device in the front of all
wading devices.
Maintenance valves should be installed between the device and
main water meter and between the device and rear wading
device.
installation.
The installation should be away from acid and alkaline
substances or gases to avoid corrosion.
If it is required to install the device outdoors, the device room
should be built to avoid the device exposure to sun, rain, snow
and other damages.
broken.
long time or the user is absent from home.
Remove the power adapter plug when the device is not used for
a long time or the user is absent from home.
Please slowly turn on the main water valve before resuming use
when the device is not used for a long time. Drain sewage and
rinse the device once before re-use.
The spare parts and wearing parts that do not compatible with
function.
The installation of unauthorized components or unauthorized
safety and reduce warranty coverage.
When any part is replaced, it is only allowed to use
Viessmann original parts or the spare parts approved by
Viessmann.
safe operation of the device. Defective parts must be replaced
with the original Viessmann part
15
Note
It indicates a danger that could result in
minor injury or property damage.
EN