Initial Operation; Check The Tightness; Installation Of Power Adapter; Boot For The First Time - Viessmann Vitopure S4-RO-400G Pro Installation And Service Manual

Initial Operation

Note

Check the Tightness

After the installation is completed, slowly turn on the water source
main switch, then turn on the three-way ball valve switch, and
check the connections of the water inlet three-way ball valve in
turn according to the order of water inlet and water outlet. The
water purifier is connected with PE pipeline at each inlet and
outlet, and the water purification faucet screw is quickly
connected. Ensure that the above connection points are installed
correctly without water leakage. Make sure that the circuit system
is kept dry before turning on the power.

Installation of Power Adapter

■ The standard power adapter is the default device to provide
power for the filter.
■ Insert the round plug at the output end of the power adapter
into the power input hole at the back end of the product.
■ Connect the movie adapter to the power outlet.
Use for the First Time
■ When using for the first time, please check all the connecting
fittings to ensure that the pipes are watertight.
■ After installation, connect the power supply, touch the touch
switch on the machine panel, the filter operation indicator light
will light up, and slowly turn on the water outlet switch of the
water purification faucet.
Problems and how to handle
Problems
No clean/purified water
Power connection problem
Power connection problem
The control panel
does not light up
The number on control
Filter replacement reminder
panel turn red
Abnormal noise
Water leakage
Cause
Waterway installation Check whether the inlet and outlet pipes are installed in place, the valves are closed,
and the tap water is supplied normally.
problems
Check whether the power supply of the socket is normal and whether the plug
of the power cord is disconnected.
Device failure Contact your local Viessmann after-sales service facility.
Check whether the power supply of the socket is normal and whether the plug
of the power cord is disconnected.
Device failure Contact your local Viessmann after-sales service facility.
This is a normal function of the device, please contact Viessmann's
local after-sales service facility to replace the filter.
Device placement Make sure the device is placed flat and stable, if the problem is not resolved,
please contact your local Viessmann after-sales facility.
is unbalanced
Waterway installation First, disconnect the power supply, close the water valve, and then contact
Viessmann's local after-sales service facility.
problems
Control Panel Description
Filter number
No.1 filter Hot-pressed polypropylene
activated carbon fiber composite filter
No.2 filter RO filter
Power switch
Turn on the Water Purifier
Touch the touch switch on the control panel of the machine, and the
indicator light on the control panel lights up.
Problems
EN
Reset key after filter
replacement
12