Control Panel Operation; Description Of Controller Panel And Buttons; Set The Number Of Days In A Rinse Cycle; Set Rinse Times - Viessmann VITOPURE Manual Book

CONTROL OPERATION
Description of controller panel
and buttons
LCD Backlight
LCD backlight may be turned on by touching any button.
LCD backlight may be turned off automatically without
any button operation within 10 seconds
Set number of days in a rinse
1. Press and hold the "SET" button for more than 2 seconds and release it when the "SET" program is displayed. Enter
the"SET" program and display the number of days in current automatic rinse cycle.
2. Each time press the "SET" button once, the number of days will increase by one day. The range of the number of days is
set 0 to 30 days. After the number of days reaches 30, it will return to 0 automatically.
3 When the value is set to 0, automatic rinse function will be turned off. Manual rinse function is still available at this
moment.
4. The number of days will be displayed on the screen after the input is completed. Please wait for 10 seconds. Do not press
any button until the "Work" program is displayed.
Work
D
SET START

Set rinse times

1. After the number of days is input, press the "START" key without waiting for 10 seconds, then set the number of days in
an automatic rinse cycle and enter into the rinse time setting program. Display the currently-set rinse time, such as "60
seconds".
2.
Each time you press the "SET" button, the rinse time will increase by 1 second. The range of the seconds setting value is 0
to 99. After the number of days reaches 99, it will return to 0 automatically.
3 The number of seconds will be displayed on the screen after the input is completed. Please wait for 10 seconds. Do not
press any key until "Work" program is displayed.
4.
When the rinse seconds is set, wait for 10 seconds and do not press any button until the "Work" status is displayed and
the rinse seconds are set. The screen displays the number of days of the set rinse cycle, such as "8 days"".
5.
When the program is displayed in the rinse seconds setting state, press the "Set" key to enter the setting state of the
automatic rinse cycle and save the set seconds.
SET
S
SET START

Set the specific time of starting rinse program

If it is required to start the automatic rinse at a specific time of the day, just reset the number of days at the moment. Wait for 10
seconds after entering the "Set" interface for number of days.
Press the
SET button for 2
SET
Seconds to enter
the state of setting
thenumber
of days.
SET
Quickly press
Quickly press
the SET button
the SET button
once to
once to increase
SET
increase the
the number of days
number of days
by 1. Press
by 1. Press
continously to
continuously to
accumulate the
accumulate the
number of days
number of days.
SET
Numeric
value
Work
S
Rinse
Working
Set
status
D
Low
Voltage
Setting
button
SET START
Quickly press the
SET button once
Quickly press the
D
to add 1 day to
SET button once to
add 1 day to the
the number of
number of day
days.
START
Wait for 10
Wait fo 10
seconds, do
seconds, do not
not press any
press any button
button and
S
and return to
return to
working state the
working state.
setting of 8 days
The setting of
and 61 second is 8 days and 61
complete seconds is
completed.
START
35
Rinse time
Number of days in an
automatic rinse cycle
Press START to start
rinse
Press START again to stop
rinsing and return to
working state
SET
D
SET START
Work
D
SET START
EN