Table of Contents
Advertisement
Universal Remote Control Operation (Figure 2)
* Function control is available on the unit and remote control.
** Function control disable to use for this model.
1. POWER Button* – Press this button to turn the HR7DD PKG on. Press the button again to turn the
HR7DD PKG off.
2. SOURCE Button* – Video signals from video equipment connected to the audio / video inputs can
be displayed on the monitor by pressing this button. Each time the button is pressed, the audio /
video source will change the sources: DVD, AV1 and AUX.
3. AUTO MEMORY Button** – When the AUTO MEMORY button is pressed, all channels are
searched and channels that are detected with signals of sufficient levels are automatically stored.
4. SKIP/SEARCH Button** – This button selects between SKIP and SEARCH mode. In "SKIP mode"
the TV tuner will tune and stop on channels that are programmed into memory when CHANNEL
UP/DOWN buttons are used. When the SKIP mode is disable, the TV will stop on all active chan-
nels.
5. ERASE/WRITE Button** – While tuned to a channel, pressing this button will store or erase the
channel from memory. The stored channel numbers are displayed in "GREEN" on the LCD display
screen, and the non-stored channel numbers are in "RED".
6. Channel Up (
) Button – Use this button to increase the channel number to the desired channel
and to scroll upward in menu options.
7. MUTE Button – Press this button to mute the audio. Pressing the button again restores sound to
the previously set level.
8. ENTER Button – Used to implement setting selected.
9. LEFT (
) Button – Use this button to shift left in the menu options.
10. MENU Button – Allows the user to access the main menu.
11. RETURN Button – Allows the user to return to the menu while PBC on.
Note: This function only present on VCD2.0.
12. TV Mode Select Button** – Switches certain function keys on the remote control for TV
functions.
13. DVD Mode Select Button – Switches certain function keys on the remote control for DVD
functions.
14. VCP Mode Select Button** – Switches certain function keys on the remote control for VCP
functions.
-3-
Advertisement
Table of Contents
