Audiovox HR7DD PKG Operation Manual page 3

HR7DD PKG system
The HR7DD PKG system is composed of two headrest units. The master unit 1
and master unit 2 has a built-in DVD player each and able to watch the DVD movie
that is playing in the master unit or play a video game plugged into the AUX input.
The other unit was able to watch the movie or play a video game that was selected
by master unit 1 at the AV1 source. There was a universal full function remote
control that able to access the control for master unit 1 or master unit 2 through the
monitor select button.
Caution: Each monitor has an AUX input on the bottom right hand side of the
screen. When the AUX connector is plugged in to this input use care when
pivoting the screen downwards. The plug will limit screen travel. Excessive
force can screen and/or plug.
Quick Start Guide
1. On master monitor, tilt the screen forward using the center tab at the top of
the screen.
2. Insert a DVD, CD or MP3 disc into the slot, label facing you.
3. The disc will start playing.
4. Tilt the monitor to a comfortable viewing position (the headrest itself can be
tilted forward to help achieve a comfortable viewing position).
5. Each wireless headphone has a CH A/CH B switch. When sitting in front of the
master 1 screen, use the CH A switch setting. When sitting in front of the
master 2 screen, use the CH B switch setting. Set the headphone to the
proper channel and press the Power On/Off switch. The power indicator will
light up red. Turn the volume down to its lowest setting before putting them on
your head.
6. When the DVD menu appears, select the menu item using the cursor keys
and press the Enter or Play button.
7. If audio playback through the vehicle radio is preferred, use the FM transmitter
On/Off button on the remote control. Set the vehicle radio to the channel
selected on the master monitor. If interference with a local radio station oc
curs, set the FM modulator to one of the other two radio frequencies using the
FM transmitter channel select button on the remote control.
8. Turn on the master monitor 2 screen using the power button on the front of the
screen or the universal remote control.
9. Tilt the screen to a comfortable viewing position (the headrest itself can be
tilted forward to help achieve a comfortable viewing position).
10. Select AV1 to share the other master until movie or DVD to play other DVD
movie.
NOTE: Select the universal master remote control monitor select as M1 will
only control the master 1 screen; the monitor select as M2 will only control the
-1-