Table of Contents
Advertisement
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8
RecoveryEasy
RecoveryEasy
RecoveryEasy
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8
Introduction:
RecoveryEasy
TM
, the latest QDI innovation, is able to protect the system from being
destroyed, by creating a so-called "mirror partition" for a current hard disk partition
and backuping all the data to the mirror area. This ideal utility provides disk partition,
disk data backup/recovery, CMOS settings backup/recovery and multi-boot functions.
RecoveryEasy is also able to prevent the system from being attacked by different
kinds of boot virus or other severe virus such as CIH. In case the system is ruined
either by mistake or virus, the system can be recovered from the mirror partition. It
applies the build-in BIOS technology that does not occupy either the hard disk space
or the system memory. It's the best choice for both corporations and PC users.
Operation Process:
There are two hotkeys – Ctrl+Bksp and F12 for RecoveryEasy to enter "Partition" and
"Recovery" user interfaces accordingly during BIOS booting up. If two or more hard
disks are installed, use F5 key to choose the hard disk.
1.
Partition Interface (see figure-1)
Users can create and delete partitions/mirror partitions, activate partitions, and uninstall
RecoveryEasy in Partition User Interface.
1.0 Install RecoveryEasy for the first time
a. The utility checks the previous disk partition at first, and displays the status of
the first four partitions. If there are more than four disk partitions, users will be
asked to delete the redundant disk partitions, since only four partitions that can
be activated are allowed to exist. However, if there're only four or fewer parti-
tions, users can follow the system prompt and choose to install RecoveryEasy
based on the previous disk partitions. In this way, the original extension parti-
tions will be changed to normal ones, and probably the sequence of the parti-
tions will be changed also, but the contents contained in each partition will
remain the same.
figure-1 Partition Interface
Manual for SynactiX 2EP
SynactiX 2EP
Advertisement
Table of Contents
