FOLLOW ME function SWING function Silent function Short cut function Important note Read this manual carefully before installing or operating your new air conditioning unit. Make sure to save this manual for future reference. Kaden Remote Controller Manual | 3...
Temperature sensing and room temperature display button SELF CLEAN Starts and stops the units self-clean feature TURBO Enables unit to reach SHORT CUT preset temperature in Sets and activates your shortest possible time favourite settings 4 | Kaden Remote Controller Manual...
Do not leave batteries in the remote controller if you don’t in the holder plan on using the device for more than 2 months. Battery disposal Do not dispose of batteries as unsorted municipal waste. Refer to local laws for proper disposal of batteries. Kaden Remote Controller Manual | 5...
Low speed Silent feature LOCK feature Medium speed display display High speed Follow me feature Sleep mode display display AUTO Auto fan speed This fan speed can not be adjusted in AUTO or DRY mode 6 | Kaden Remote Controller Manual...
4. Press the ON/OFF button to start the unit. Setting temperature Mode ON/OFF The operating temperature range for units is 17ºC – 30ºC. You can increase or decrease the set temperature in 1ºC increments. Timer Sleep Follow Short Self Turbo clean Kaden Remote Controller Manual | 7...
3. Press the ON/OFF button to start the unit. NOTE: You can’t set temperature in FAN mode. Your remote control’s LCD screen will not display temperature. Mode ON/OFF Timer Sleep Follow Short Self Turbo clean 8 | Kaden Remote Controller Manual...
NOTE: As outdoor temperature drops, the performance Mode ON/OFF of your unit’s HEAT function may be affected. In such instances, we recommend using this air conditioner in conjunction with other heating appliances. Timer Sleep Follow Short Self Turbo clean Kaden Remote Controller Manual | 9...
24, it will increase in 1 hour increments. The timer Example: Setting unit to turn will revert to zero after 24 hours. You can turn off either on after 2.5 hours function by setting its timer to “0.0h”. 10 | Kaden Remote Controller Manual...
1:00 PM, and you want the unit to turn on automatically at 7:00 PM. You want it to operate for 2 hours, then automatically turn off at 9:00 PM. Do the following: 3 sec Timer 3 sec Timer Kaden Remote Controller Manual | 11...
Page 12
Timer is set to turn ON Timer is set to turn OFF 6 hours from current time 8 hours from current time Timer starts Unit turns Unit turns Current time 1PM 6 hours later 8 hours later 12 | Kaden Remote Controller Manual...
The TURBO function allows the unit to reach your set temperature in the shortest amount of time possible. • When you select TURBO feature in COOL/HEAT mode, the unit will blow cool/hot air with strongest wind setting to jump-start the cooling/heating process. Kaden Remote Controller Manual | 13...
6 degrees in angle for each press. If held down for more than indoor unit itself) will enable the air conditioner to optimise the 2 seconds, the louvre will swing up and down automatically. temperature around you and ensure maximum comfort. 14 | Kaden Remote Controller Manual...
(if activated). • If held down for more than 2 seconds, the system will store the current operation settings including operating mode, setting temperature, fan speed level and sleep feature (if activated) as a shortcut. Kaden Remote Controller Manual | 15...
Need help?
Do you have a question about the KCS Series and is the answer not in the manual?
Questions and answers