TP-Link TL-WA5210G Installation Manual page 19

Once selected, the region option can't be adjusted unless you
Note
reset the device to factory defaults and reconfigure it again.
The web management page will
display after your successful
login.
Click Quick Setup
Operation Mode Setting
This page will then display.
Choose the Operation
Mode Type appropriate
to your needs
Click Next
The AP supports three operation modes: AP Client Router, AP
Note
Router and AP.
If you want to configure the three operation modes, you can refer
Note
to the User Guide in the CD.
Antenna Alignment
After basic configuration
operation mode, you can adjust
your CPE's direction to get a
better signal strength according to
the parameters shown on the
Antenna Alignment page.
Click Wireless
Click Antenna Alignment
of
17