TP-Link TL-WA5210G Installation Manual page 15

Installation
The product model shown in this QIG is TL-WA5210G, as an
example.
1
Typical Network
TL-WA5210G is used for remote point-to-point connection. It makes
remote Internet share possible.
Outdoor AP
Power Injector
The typical connection for TL-WA5210G is shown as above.
Note
Please make sure that the two CPEs are placed face to face;
otherwise the wireless signal strength might be weak. Here shows
several incorrect examples.
If you are using an external antenna to connect, please refer to
Note
Appendix 1.
Power Injector
13
Outdoor AP