GE Vivid E9 Service Manual page 558

GE
D GB091046, R
IRECTION
8-11-3-1 Preparations (cont'd)
3.) If possible, wipe the HDD partitions as described here: Reload the system software from DVD.
Select A: to overwrite all content on HDD.
4.) Power down the VIVID E9 / VIVID E7.
5.) Disconnect the Mains Power Cable from the wall outlet.
6.) Disconnect all probes and external I/O cabling.
7.) Remove the Left Side Cover.
8.) Remove the BEP Cover.
a.) Loosen the BEP Cover's fixing screw(s).
b.) Tilt the top of the BEP Cover away from the BEP.
c.) Set the BEP Cover aside.
8 - 242
2
EVISION
- On BEP6 there are two finger screws on the top of the BEP Cover.
Section 8-11 - Back End Processor (BEP) parts replacement
VIVID E9 / VIVID E7 BT'13 S M
ERVICE ANUAL