GE Vivid E9 Service Manual page 393

GE
D GB091046, R
IRECTION
8-6-4-2 Remove the LCD Cables (cont'd)
2.) Remove the bumper cover from the end of the first arm, as shown in Figure 8-59.
Figure 8-59 Bumper Cover, Removed
3.) Remove the covers from all three arm sections of the arm assembly.
a.) Remove the M4 x 8 screw holding the first arm section cover.
b.) Remove the M4 x 8 screw holding the third arm section cover.
2
EVISION
Figure 8-60 Third Arm Section Cover Removal
Chapter 8 - Replacement procedures
VIVID E9 / VIVID E7 BT'13 S M
ERVICE ANUAL
8 - 77