GE Vivid E9 Service Manual page 549

GE
D GB091046, R
IRECTION
8-11-1-4 Prepeare the new BEP for installation
BEFORE YOU DISPOSE OF THE HARD DRIVE, OR RETURN THE BEP TO THE LOCAL
WARNING WARNING
PARTS ORGANIZATION, MAKE SURE YOU REMOVE ALL PATIENT DATA FROM THE
HARD DRIVE, GIVEN THAT THE HARD DRIVE IS STILL FUNCTIONAL.
IN SOME COUNTRIES, YOU MAY BE REQUIRED TO DELETE ALL SOFTWARE FROM
THE DISK BEFORE RETURNING THE HARD DRIVE TO THE PARTS WAREHOUSE.
FOLLOW YOUR LOCAL POLICIES.
1.) If installed, remove the DVR Board from the existing BEP and install it in the replacement BEP.
For instructions, see:
2.) If 4D is installed:
-
-
-
2
EVISION
8-14-2 "Digital Video Recorder (DVR) replacement" on page
If the BEP you removed was a BEP6, and the new BEP is a BEP6, you can move over the
Graphics Adapter.
If the BEP you removed was a BEP5, and the new BEP is a BEP5, you can move over the
Graphics Adapter.
If the BEP you removed was a BEP5, and the new BEP is a BEP6, you must also order a new
Graphics Adapter.
Chapter 8 - Replacement procedures
VIVID E9 / VIVID E7 BT'13 S M
ERVICE ANUAL
8-284.
8 - 233