Position Control Operation - Mitsubishi Electric FR-V500 Series Instruction Manual

Position control operation

4.3 Position control operation
On this inverter, you can use parameter and pulse inputs to exercise position control.
Refer to the Instruction Manual (detailed) for details.
4.3.1 Position command from parameter setting
Position control is exercised using the position feed amounts set in Pr. 465 to Pr. 494.
4.3.2 Position command from PLC
Position control is exercised by connecting the PLC, such as the MELSEC-Q series PLC positioning module
(QD75), and the positioning control option (FR-V5AP) to the inverter.
4.3.3 Position command from SSCNET
Position control is exercised by connecting the motion controller and the SSCNET communication option (FR-
V5NS) to the inverter.
44