Mitsubishi Electric FR-V500 Series Instruction Manual page 119

REVISIONS
Print Date * Manual Number
Oct., 2001 IB(NA)-0600064-A
Mar., 2002 IB(NA)-0600064-B
Sep., 2002 IB(NA)-0600064-C
Nov., 2003 IB(NA)-0600064-D
Nov., 2006 IB(NA)-0600064-E
For Maximum Safety
Mitsubishi vector inverters are not designed or manufactured to be used in equipment or systems in situations
that can affect or endanger human life.
When considering this product for operation in special applications such as machinery or systems used in
passenger transportation, medical, aerospace, atomic power, electric power, or submarine repeating
applications, please contact your nearest Mitsubishi sales representative.
Although this product was manufactured under conditions of strict quality control, you are strongly advised to
install safety devices to prevent serious accidents when it is used in facilities where breakdowns of the product
are likely to cause a serious accident.
Please do not use this product for loads other than three-phase induction motors.
* The manual number is given on the bottom left of the back cover.
First edition
Addition
Three-phase 400V power input specifications
Partial additions
• Addition of "28" to the setting range of Pr. 180 to Pr.183, Pr.187(input terminal function
selection)
• Addition of "39, 139" to the setting range of Pr. 190 to Pr.192, Pr.195(output terminal
function selection)
• Addition of "2" to the setting range of Pr. 288 "droop function operation selection"
• Addition of "9999" to the setting range of Pr. 427 "excessive level error"
• Instructions for Compliance with the European Directives
• Instructions for Compliance with U.S and Canadian Electrical Codes
• Error correction
Addition
• SF-V5RU
Addition
• Pr.408 "motor thermistor selection"
• Pr.505 "speed setting reference"
• Addition of "9" to the setting range of Pr. 800 "control method selection".
• Addition of "5, 6" to the setting range of Pr. 804 "torque command source selection".
• Pr.811 "set resolution switchover"
Partial modifications
• Settings of Pr.3 "base frequency" and Pr. 84 "rated motor frequency" were changed to
"10 to 200Hz"
• Short circuit ratings (Instructions for UL and cUL compliance)
116
Revision