Table of Contents
Advertisement
2.11 LAN control
LAN control
- Power input control (ON/OFF) can be controlled by IP control command.
- Other IP control commands are based on AQUOS, therefore only some basic functions are available.
"Input switching", "Volume", "Screen adjustment", "Mute", etc.
-Please note that the command arguments and line feed codes have the following differences from the PN series.
Differences from PN series
Format of command argument
Command line feed code
Functions on remote
control buttons
Corresponding item
Various functions of OSD
Monitoring function
Power control of distribution application (e-Signage)
- This product is planned to support power ON/OFF control and input switching (INPUT switching) with e-Signage,
as in the PN series.
* It is necessary to upgrade the version of the control distribution application (e-Signage).
PN series
Right alignment
POWR___1('_' is space )
０DH, 0AH
Yes
（OSD Menu operation buttons are excluded.Various functions of
OSD）
Yes
（Excludes some functions such as OSD position adjustment.）
Hardware monitoring, temperature monitoring, log confirmation,
usage time
Copyright © All rights reserved, SHARP CORPORATION
120 "
Left alignment
POWR1___('_' is space)
０DH
Power ON/OFF, input switching, Volume, mute, brightness,
AV mode, screen size, Change the display mode and layout of input
7
Contrast, black level, color intensity,
Hue, image quality, horizontal position, vertical position,
Clock, phase, balance, Surround, adjustment lock
No
Confidential
20
20
Advertisement
Table of Contents
