Table of Contents
Advertisement
2.8 Connecting devices 1
LAN
You can control monitor functions by PC by connecting LAN. (e.g. power on/off function)
We recommend connecting LAN to monitors before installing them in higher place or other places where it is hard to connect cables after
installation. They may need in future monitor maintenances.
Please refer to Operation Manual on the page of "Operating the Monitor using a PC(IP control)" .
Media Devices and Peripheral Equipment
When you use media devices (e.g. personal computer, DVD player) or peripheral equipment (e.g. distributor, video switching unit), check the
connection operation of the devices beforehand.
Cable
-When you use light conversion cable to extend the transmission distance, EDID may not be read accurately. Not reading EDID accurately,
monitors cannot display correctly. Check the image quality beforehand when using these devices.
Copyright © All rights reserved, SHARP CORPORATION
Confidential
16
16
Advertisement
Table of Contents
