Table of Contents
Advertisement
2.2 Precautions for direct sunlight
This product is for use indoors. Please set this monitor in a place away from to the direct sunlight, wind, or rain. These conditions may cause failure and/or deterioration.
About sunlight
The product must not be exposed to the direct sunlight
Please keep the product away from direct sunlight. Please install it in shaded
areas like on a wall facing the north especially when using in an outdoor or
semi-outdoor environment.
The effect of direct sunlight
If the product is being used under direct sunlight
- The effect of brightness
> Monitor would look much darker than the normal use.
- The effect of ultraviolet rays and infrared rays.
> It causes LCD to malfunction.
- The temperature rise may cause a malfunction.
(No matter how much you cool the surroundings, the temperature of the area exposed to
sunlight is high.)
> Monitor will break down or uniformity issue will occur.
Cabinet will also deform.
Example of LCD darkening
Example of LCD darkening
Copyright © All rights reserved, SHARP CORPORATION
Measures against sunlight
Please take measures against ultraviolet rays ,infrared rays and temperature.
- Set a sun-shade above the monitor
- Utilize the shade of the building
- Place the monitor where there is no direct sunlight
- Change the direction of the monitor to avoid sunlight
- Using some object which can block out the direct sunlight
(You should pay attention to strong winds like hurricanes.)
Utilizing the shade of the
building
A shade above the product
Setting the monitor back to the place
where there is no direct sunlight
Confidential
10
10
Advertisement
Table of Contents
