EAST COAST Caribbean Side Assembly Instructions

Bar stool

Important

Please Read All Instructions Carefully Before Assembling This Product

• Inspect all parts to make sure that nothing is broken or missing. If something is broken

or missing, please contact our service department at service@ecchairandbarstool.com.

• The bar stool must be completely assembled before attempting to use it. Failure to do so

could result in damage to the bar stool or the user.

• Use proper safety gear and follow appropriate safety precautions when assembling this product.

• Important - Do not over-tighten the bolts.

• Only hand tools should be used for assembly. Do not use power tools.

• East Coast Chair & Barstool will not be liable for any injury or damage resulting

from improper assembly and/or use of this product.

• Failure to follow all instructions will result in the product warranty being voided.

www.TablesChairsBarstools.com • www.RestaurantFurniture4Sale.com • www.OutdoorRestaurantFurniture4Sale.com

966 Perry Highway, Mercer, PA 16137 • Phone (800) 986-5352 • Fax (724) 748-6206

www.AdirondackChairs4Less.com • https://stores.ebay.com/East-Coast-Chair-and-Barstool

Assembly Instructions

Caribbean Side Bar Stool

Congratulations on the purchase of your new

Caribbean Side Bar Stool. You will soon be enjoy-

ing your outdoor area in the comfort of this

classic side bar stool when you follow these easy

step by step instructions.

Table of Contents

Need help?

Do you have a question about the Caribbean Side and is the answer not in the manual?

Page 1 • Important - Do not over-tighten the bolts. • Only hand tools should be used for assembly. Do not use power tools. • East Coast Chair & Barstool will not be liable for any injury or damage resulting from improper assembly and/or use of this product.
Page 2 Parts Make sure you have received everything. If anything is missing or damaged, please contact our service department at service@ecchairandbarstool.com. Frame - 1 pc Brace - 1 pc Hardware - Shown at Actual Size Bolts - 6 pcs These are located in a bag taped to the leg.
Page 3 Let’s Get Started! Step 1 - Allign the Brace with the Bar Stool • Remove the bolts from the bag taped to the bar stool (A) • Attach the brace (B) to the legs using the bolts (C) • Begin to thread bolts but don’t tighten completely Screw in the bolts on the back part of the brace to more easily attach the front bolts.
Page 4 Care Poly lumber is easy to clean and maintain. Dust with a soft cloth or soft bristle brush, and tend to spills and stains with a mild soap and water. No waterproofing, no staining, and no painting is ever required! IMPORTANT! Periodically check to make sure that all bolts are properly tightened.