D-Link DAP-2682 User Manual page 43

Section 3 - Configuration
Get IP From:
Static IP (Manual) is chosen here. Choose this
option if you do not have a DHCP server in your
network, or if you wish to assign a static IP address
to the DAP-2682. When Dynamic IP (DHCP) is
selected, the other fields here will be grayed out.
Please allow about 2 minutes for the DHCP client
to be functional once this selection is made.
IP Address:
Assign a static IP address that is within the IP
address range of your network.
Subnet Mask:
Enter the subnet mask. All devices in the network
must share the same subnet mask.
Gateway:
Enter the IP address of the gateway/router in your
network.
DNS:
Enter a DNS server IP address. This is usually the
local IP address of your gateway/router.
Username:
Enter the username for the new account here.
Password:
Enter the password for the new account here.
Add: Click to create a defined rule.
Clear:
Click to remove the settings from the menu
interface.
Edit:
Click to edit the selected gateway entry.
Delete:
Click to delete the gateway entry.
Save:
Click to save the updated configuration. To make
the updates permanent, click Configuration > Save
and Activate.
D-Link DAP-2682 User Manual 43