Authentication Settings- Ldap - D-Link DAP-2682 User Manual

Section 3 - Configuration
The Captive Portal is a built-in web authentication server. When a station connects to an AP, the web browser will be redirected to a web authentication
page. In this window, users can view and configure the Captive Portal settings. After selecting LDAP as the Authentication Type, you can configure
the LDAP authentication that will be applied to each wireless client in this network.
Session
Enter the session timeout value here. This value can
timeout(1-1440): be from 1 to 1440 minutes. By default, this value is
60 minutes.
Band:
Select 2.4GHz or 5GHz.
SSID Index: Select the SSID for this Authentication.
Authentication Type:
Select the captive portal encryption type here.
Options to choose from are Web Redirection,
Username/Password, Passcode, Remote RADIUS,
LDAP and POP3. In this section we'll discuss the LDAP
option.
Web Redirection State: The default setting is Disable. Select Enable to enable
the website redirection feature.
URL Path: Select whether to use either HTTP or HTTPS here.
After selecting either http:// or https://, enter the URL
of the website that will be used in the space provided.
IPIF Status:
Select to Enable or Disable the Captive Portal with
its IP interface feature here.
VLAN Group: Enter the VLAN Group ID here.
Get IP From: Static IP (Manual) is chosen here. Choose this option
if you do not have a DHCP server in your network, or
if you wish to assign a static IP address to the DAP-
2682. When Dynamic IP (DHCP) is selected, the other
fields here will be grayed out. Please allow about 2
minutes for the DHCP client to be functional once
this selection is made.
D-Link DAP-2682 User Manual

Authentication Settings- LDAP

49