D-Link DAP-2682 User Manual page 41

Section 3 - Configuration
Get IP From:
Static IP (Manual) is chosen here. Choose this
option if you do not have a DHCP server in
your network, or if you wish to assign a static
IP address to the DAP-2682. When Dynamic
IP (DHCP) is selected, the other fields here will
be grayed out. Please allow about 2 minutes
for the DHCP client to be functional once this
selection is made.
IP Address:
Assign a static IP address that is within the IP
address range of your network.
Subnet Mask:
Enter the subnet mask. All devices in the
network must share the same subnet mask.
Enter the IP address of the gateway/router in
Gateway:
your network.
Enter a DNS server IP address. This is usually
DNS:
the local IP address of your gateway/router.
Click to edit the selected entry.
Edit:
Click to delete the entry.
Delete:
Click to save the updated configuration.
Save:
To make the updates permanent, click
Configuration > Save and Activate.
D-Link DAP-2682 User Manual 41