Download Print this page

Advertisement

Quick Links

Accessory Legs Assembly & Use
Copyright January 11th, 2021
Grace Company
(Reproduction Prohibited)
Version 1.1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Cuite and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Grace Company Cuite

  • Page 1 Accessory Legs Assembly & Use Copyright January 11th, 2021 Grace Company (Reproduction Prohibited) Version 1.1...
  • Page 2: Table Of Contents

    Cutie Frame - Accessory Legs Contents Included Parts & Tools ........................ 3 Step 1 - Assembling the Legs ...................... 4 Step 2 - Assembling the Table ..................... 7 Step 3 - Setting the Table Height ....................8 Step 4 - Installing the Frame ......................11 Step 5 - Leveling the Frame .......................12...
  • Page 3: Included Parts & Tools

    Cutie Frame - Accessory Legs Included Parts & Tools Please make sure all pieces are included in your kit. Leg Corner Leg Corner Table Support Spacer Brace (x2) Bracket A (x4) Bracket B (x4) Brace (x6) QTT-04-14748 QTT-04-14752 QTT-04-14750 QTT-04-14749 See page 4 See page 4 See page 4...
  • Page 4: Step 1 - Assembling The Legs

    Cutie Frame - Accessory Legs Step 1 - Assembling the Legs Parts & Tools Needed: Leg Corner Leg Corner Table Support SBHCS Bracket A (x4) Bracket B (x4) Brace (x6) M5 x 10 mm (x40) Spacer Brace (x2) Leg Assembly (x4) 3 mm Allen Wrench Instructions Take the following steps:...
  • Page 5 Cutie Frame - Accessory Legs With another four M5 x 10 mm SBHCS, screw a table leg to the leg corner braces. Attach so the nuts on the legs face away from the corner braces. Do this step twice. SBHCS M5 x 10 mm (x4) Leg Assembly (x2) Place two table support braces onto a spacer brace, and screw into place with four M5 x...
  • Page 6 Cutie Frame - Accessory Legs Attach one of the frame ends from step 2 to one of the frame sides from step 4 using two M5 x 10 mm SBHCS. Do this step twice. SBHCS M5 x 10 mm (x2) Align the two frame corners and attach them together with four M5 x 10 mm SBHCS.
  • Page 7: Step 2 - Assembling The Table

    Cutie Frame - Accessory Legs Step 2 - Assembling the Table Parts & Tools Needed: SBHCS M5 X Cross Support (x3) Side Table Section Center Table Section 10 mm (x6) with Foam (x2) with Foam (x2) 3 mm Allen Wrench Instructions Assemble the tabletop to add stability to the legs.
  • Page 8: Step 3 - Setting The Table Height

    Cutie Frame - Accessory Legs Step 3 - Setting the Table Height Parts & Tools Needed: Box-End Wrench 4 mm Allen Wrench 2.5 mm Tape Measure 13 mm & 10 mm Allen Wrench (not included) Pen or Pencil (not included) Instructions Before installing the table top frame onto the legs, set the height.
  • Page 9 Cutie Frame - Accessory Legs With the 2.5 mm Allen wrench, loosen the set screws in each leg of the frame. Set Screw (x4) Use the 4 mm Allen wrench and 10 mm Box-End wrench to remove the M6 x 35 mm SBHCS screw, washer, and nut on each leg.
  • Page 10 Cutie Frame - Accessory Legs Once the height is set, reinstall the M6 x 35 mm SBHCS screw, washer, and nut on each leg with the 4 mm Allen wrench and the 10 mm box-end wrench. Washer (x4) M6 x 35 mm SBHCS (x4) Nut (x4) Re-tighten the set screw on each leg with the 2.5 mm Allen wrench.
  • Page 11: Step 4 - Installing The Frame

    Cutie Frame - Accessory Legs Step 4 - Installing the Frame Parts & Tools Needed: SBHCS 3 mm Allen Wrench M5 X 10 mm (x4) Instructions Take the follow steps to secure the table-top frame to the frame legs and table: Uninstall the take-up (rear) rail, sewing machine, top plate, and bottom carriage from the table-top frame and carefully place the frame onto the table.
  • Page 12: Step 5 - Leveling The Frame

    Cutie Frame - Accessory Legs Step 5 - Leveling the Frame Parts & Tools Needed: Box-end Wrench 13 mm & 10 mm Instructions A level frame prevents the machine from wandering on the track when you let go of the handles. Take the following steps to level your frame: Move the machine and bottom carriage to one corner of the frame and then release.
  • Page 13 Cutie Frame - Accessory Legs Test the next corner of the frame, and Leveling Foot Adjustment adjust the leveling foot underneath if needed. Loosen the top nut on the leveling foot with the 13 mm wrench. Test the middle of the frame next, and then the other two corners.
  • Page 14 Cutie Frame - Accessory Legs The Grace Company 2225 South 3200 West Salt Lake City, UT 84119 Phone: 1-800-264-0644 Fax: 801-908-8888 www.graceframe.com...