Notice to individuals with implanted cardiac pacemakers or AICD devices: Any source of RF (radio frequency) energy may interfere with normal functioning of the implanted device. All wireless microphones have low-power transmitters (less than 0.05 watts output) which are unlikely to cause difficulty, especially if they are at least a few inches away.
Page 3
There is about a half-second delay after transmitter turn-on before the receiver’s Tone Lock squelch un-mutes. HIGH-PASS SWITCH: The ESW-T211 offers an audio high-pass switch which reduces low frequencies, when desired. It affects only the microphone input and is recessed to avoid accidental activation.
Mounting Clips The ESW-T211 is supplied with two mounting clips for attachment to different types/shapes of objects. Attach the clips by springing their ends into the two holes on the sides of the transmitter case (Fig. D). The clips may be installed with the case positioned either “up”...
† In the interest of standards development, A.T.U.S. offers full details on its test methods to other industry professionals on request. Transmitter Accessories (All are terminated for use with the ESW-T211 UniPak transmitter.) AT829cW AT829 miniature cardioid condenser microphone only.
Page 7
For future reference, please record your system information here (the serial number appears inside the battery compartment): Transmitter ESW-T211 Serial Number One-Year Limited Warranty Audio-Technica professional wireless systems purchased in the U.S.A. are warranted for one year from date of purchase by Audio-Technica U.S., Inc.
Need help?
Do you have a question about the ESW-T211 and is the answer not in the manual?
Questions and answers