Download Print this page
Audio Technica UniPak ATW-T93 Installation And Operation
Audio Technica UniPak ATW-T93 Installation And Operation

Audio Technica UniPak ATW-T93 Installation And Operation

Uhf transmitter

Advertisement

Quick Links

ATW-T93 UHF UniPak
TM
Transmitter
Installation and Operation

Advertisement

loading
Need help?

Need help?

Do you have a question about the UniPak ATW-T93 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Audio Technica UniPak ATW-T93

  • Page 1 ATW-T93 UHF UniPak Transmitter Installation and Operation...
  • Page 2 ATW-T93 UHF UniPak Body-pack Transmitter Transmitter Input Connection Introduction Connect an audio input device (microphone or guitar The Audio -Technica UHF band wireless systems are cable) to the audio input connector beside the user offered as separate receiver and transmitter units, rather control panel (Fig.
  • Page 3 For INSTRUMENT: Make an initial adjustment of the System Operation instrument amplifier input level control that will allow audio Turn down the mixer/amplifier level before starting through the system as you increase the transmitter's up the wireless system. Guitar Level. Switch on the receiver.
  • Page 4 Audio-Technica UHF Wireless Operating Frequencies Frequency and Channel Designator List Frequency (MHz) Frequency (MHz) Frequency (MHz) Frequency (MHz) 800.550 804.825 810.075 815.425 805.075 810.200 815.450 800.575 800.600 805.150 810.325 816.525 801.100 805.200 810.550 816.550 801.125 805.300 810.575 816.575 801.150 805.775 811.075 816.650 817.100...