Page 1
System 10 and System 10 PRO Components Digital Wireless Installation and Operation ATW-T1006 Boundary Microphone Transmitter ATW-T1007 Microphone Desk Stand Transmitter...
Page 2
• Do no short circuit; may cause burns or catch fire. • Charge battery only with the supplied AC adapter and USB cable. The ATW-T1006 and ATW-T1007 comply with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules.
Transmitter Location connect the Micro-USB B port to the USB Power Input on the rear of For best operation the ATW-T1006 boundary microphone transmitter the transmitter. Next, plug the adapter into a standard 120 V 60 Hz or or ATW-T1007 microphone desk stand transmitter should be kept at 230 V 50 Hz (depending on global location) AC power outlet.
ATW-T1007 microphone desk stand transmitter should be placed illuminate red while the battery is charging and illuminate green once on a flat, unobstructed mounting surface. The ATW-T1006 should be the battery is fully charged.) positioned so the front of the microphone faces the sound source. The sound source should not be below, or higher than 60°...
Page 5
ATW-T1006 and ATW-T1007 Installation and Operation Setting the Switch Function NOTE: With all transmitters turned off, the receiver’s System ID Display will cycle through all currently paired ID numbers. Turn on a transmitter 1. The default Switch Function setting is TOGGLE ON/OFF (with to activate its pairing with the receiver.
ATW-T1006 and ATW-T1007 Installation and Operation System Frequencies For future reference, please record your system information here (the serial number appears on each transmitter). Transmitter Model ATW-T100 Serial Number 6 or 7 Specifications OverAll SySTem To reduce the environmental impact of a multi-language printed document, product information is available online at www.audio-technica.com in a selection of languages.
Page 7
ATW-T1006 and ATW-T1007 Installation and Operation This page intentionally left blank.
Need help?
Do you have a question about the ATW-T1006 and is the answer not in the manual?
Questions and answers