Features; Start-Up - Abilica CrossTech E-14 Manual

FEATURES

Time
Speed
Distance
Calorie
Note: Calorie consumption is an indication only!
Watt
Pulse
Note: Hold the hand pulse with both hands for at least 30 sec.

START-UP

When you enable the display will light up all the symbols for 2 sec. (Figure 1) and
let out a long beep. Then the software version number is displayed (Figure 2)
Figure 1
When the computer is reset, all values show 00:00, and all functions will flash
simultaneously at the top of the display. This is called "startup window" (Figure 4)
and is the starting point for all the settings described further herein.
In U1 to U4, you can enter up to 4 different user settings.
For a fixed work out time, distance or the like, please enter now. Note
that the parameters you enter a value will count down, while all
parameters left at 0 will count up. Training session is terminated when one of
parameters have counted down to 0 You can only select / modify user profiles
when the display is in sleep mode (Figure 4)
after pressing the TOTAL RESET.
Figure 4
a) Shows the time from 00:00 to 99:59
b) Counts down to 0 from the selected time
Displays the speed from 0.00 to 99.9 km.
a) Shows the distance from 00.00 to 99.9 km.
b) Count down to 0.00 from selected distance
a) Displays calories burned from 0 to 999
b) Counts down to 0 from the selected calorie consumption
Shows energy consumption from 10W to 350W.
Note: Can be programmed for manual application.
Shows pulse from 0 to 240 BPM.
Figure 2
33