Prestan Adult Manikin 2000 Series Use And Care Instruction page 20

FACE‐SHIELD / VENTILATION LUNG‐BAG INSTALLATION
Unlatch
1. the torso of the PRESTAN Professional Adult Series
2000 Manikin by popping the 'tabs' located at the top of
the shoulders (Figure 1). Carefully lift the torso frame open
by the neck. Note: Do not pull on tabs (past popping the
latch). Doing so may break the tabs or stretch out the
frame over time, impairing the latching function.
2. Attach the head to the torso by placing the neck of the head
onto the two spindles on the neck portion of the torso (Figure 2).
3. Fold the Lung‐Bag portion of the Face‐Shield/Lung‐Bag (Figures 3a‐3d):
•
The Face‐Shield/Lung‐Bag has four 'dotted lines' printed on one side of the bag (along with an oval)
•
Using the four dotted lines, fold the Face‐Shield/Lung‐Bag into fourths, following the diagram below
Figure 3a
4. Tilt back the head of the manikin (Figure 4).
5. Insert the folded Lung‐Bag into the mouth of
the manikin. The plastic adaptor must face
away from the manikin for connection to
the ventilation monitoring cord (Figure 5).
6. Push the Lung‐Bag into the mouth until the bag exits
through the neck of the manikin (Figure 6).
7. Grasp the Lung‐Bag and finish pulling it through the
neck of the manikin. Connect the plastic adaptor to
the ventilation monitoring cord. (Figure 7).
8. Attach the Face‐Shield tabs to the 'buttons' located
on the side of the manikin head (Figure 8).
9. Lightly pull down on the Lung‐Bag to help open the
mouth hole on the Face‐Shield.
10. Then position the Lung‐Bag on top of the compression
plate (the semi-rigid circular piece found on top of the
torso foam core) with the circular imprint on the
Lung‐Bag aligning with the compression plate (Figure 9).
11. With proper positioning, the neck of the Face‐Shield/
Lung‐Bag will have slack. Make sure it is not twisted.
12. Close the torso and secure the latch by pushing on the
shoulder tabs until they snap into place.
COPYRIGHT© 2021 PRESTAN PRODUCTS, LLC
Figure 3b
20
Figure 1
Figure 3c
Figure 4
Figure 6
Figure 8
Figure 2
Figure 3d
Figure 5
Figure 7
Figure 9
12716-RevB