Configure Pro:centric Settings - LG ProCentric 32LV570H Setup Manual

Confi gure Pro:Centric Settings
Once you select "Next" from the TV Confi guration Options screen, the Searching for Pro:Centric
Server screen is displayed.
Note: Select the "Back" button, where available, to check previous settings, as necessary.
Z
EZ-Manager Wizard
2 4
1 3
Searching for Pro:Centric Server...
It may take 1 min 32 second(s).
This step automatically searches for the Pro:Centric server.
If there is no Pro:Centric Server installed, you do not need to continue
with this procedure. Please select either 'Exit' or 'Manual Pro:Centric'.
Status : Tuning channel 49
TV is now searching all of the channels for the data channel...
Back
You have the following options:
• You can allow the EZ-Manager Wizard to proceed with a series of automated steps to confi gure
the TV for Pro:Centric operation and then to look for the Pro:Centric application and maintenance
(E-Z Installation) fi les to download. In this case, the wizard uses a search algorithm to determine
the Data Channel and the Pro:Centric Application Mode to set in the TV.
Continue with the "Automated Pro:Centric Confi guration" subsection below.
• If you already know the settings (i.e., Data Channel and Pro:Centric Application Mode) that need
to be confi gured in order for the TV to connect to the Pro:Centric server and/or if the Pro:Centric
server is not yet installed, you may expedite the setup process by entering this data manually.
Continue with the "Manual Pro:Centric Confi guration" subsection on the following page.
Automated Pro:Centric Confi guration
Note: If the server is not yet confi gured on the system, use the manual confi guration option to confi g-
ure the Pro:Centric operation. See also note below.
Note: If Pro:Centric data delivery will be over IP and there is a DNS server at the site, you can
create a "procentric.local" DNS entry for the Pro:Centric server that will enable automated
Pro:Centric IP confi guration via the EZ-Manager. If there is no DNS entry for procentric.local, you
must use the manual confi guration option to confi gure the Pro:Centric IP operation.
Once the Pro:Centric data channel is found (a Pro:Centric Server Was Found screen will be
displayed) and the Pro:Centric Application Mode is determined, the wizard will advance to the
Processing the Pro:Centric Confi guration screen, which shows the progress of the data
downloads (see example on following page). Note that some steps may require a few minutes.
If the process is successful, no further user interaction is required, though, in some instances, where
the option (for example "Next") is available, you may manually move forward to subsequent steps
within the wizard to speed up the process.
206-4317 Draft A.2
Manual Pro:Centric
Exit
EZ-Manager Wizard (Cont.)
(Continued on next page)
15