SMP 3
An Allen-Bradley SCANport cable is used to connect the
communications adapter and an SMP 3. See the cable requirements
on page 2–16 for details on cable length.
Figure 2.15
SCANport connection on Remote I/O
SMP 3
SMC Dialog Plus
An Allen-Bradley Bulletin 1202 SCANport cable is required to
connect the communications adapter and the SMC Dialog Plus
controller.
Figure 2.16
SCANport connection on Remote I/O
Allen-Bradley SMC Dialog Plus
ESC
SEL
SMC Dialog Plus
Installation
RESET
SCANport
Remote
Reset
Enclosed
Adapter
AB0538A
Enclosed
Adapter
SCANport
AB0537A
Publication 1203–5.1 –– July, 1997
2–17