Canon Voice Operation Kit User Manual page 169

[Rotate 90 Degrees] appears only if an
optional finisher is not attached to the
machine.
If you want holes made in your
●
output:
☐ Move the focus to [Hole Punch] and
press
If you want to use voice recognition,
press the Voice Recognition button →
say "hole punch. "
You may be able to select the type of holes
to punch, depending on the region or
the optional equipment attached to the
machine.
If you want to fold in your output:
●
☐ Move the focus to [Fold] → press
(Select).
If you want to use voice recognition,
press the voice Recognition button →
say "fold. "
(Select).
Basic Copy Settings 2-89
2